WalBond - Drychem

Product Description

Drychem Walbond is ready to use adhesive blended with fine aggregates to provide good strength, bonding to gypsum-based plaster, POP as well as cement-based plaster. It is a green coloured viscous liquid that can be applied to smooth, rough, concrete surface of shear walls, columns, ceiling slab, etc. It eliminates the surface hacking hence it recommended on smooth surfaces before plastering.

Features

Ready to use, mix and apply
One coat application required
No need of hacking the surface
Excellent grip to plaster

Details:

Nature	Green colour viscous liquid
Composition	Co-polymer emulsion, fillers, sand & additives
Specific gravity @ 27°C	1.30 – 1.60
pH	7.50 – 9.50
Non-volatile content	55 – 60%
Viscosity	2000 – 5000 cP
Drying time	24 hours
Adhesion strength : (on gypsum substrate)	> 0.50 MPa

Guidance For Application

SURFACE PREPARATION:
1- Clean the surface to remove any dust and loose particles.
2- Remove any previous applied coating, oil, grease, dirt, or any other foreign particles.

APPLICATION:
1- Apply the material over the cleaned surface with the help of brush.
2- One coat is sufficient for proper bonding.
3- Plaster must be applied after 2 days and within 10 days after the application of Walbond.

Cleaning:

Clean the tools and equipment’s before the material hardens.
Spillages of Drychem Walbond should be absorbed onto sand, earth or vermiculite and transferred to suitable containers. Remains should be hosed down with large quantities of water.

TDS

DryChem Is Always Interested In New, Challenging And Exciting Projects

So, why not contact us and send us your project requirements, and we'll do the rest!

Submit A Project Request

Get In Touch

Wall Putty

Texture

Tile Adhesives

Grouts

Other Adhesives

Plastering Solutions

Gypsum Solutions

Repair Mortar

Micro Concrete

Non Shrinkage Grout

Floor Hardner

Coatings