Get In Touch

      Product Description

      Block Jointing Mortar-LC-51510 consists of cement, graded sand and specialized polymers which combine to give superior strength, water retention and stability.

      Features

      • Increasing overall masonry strength & load-bearing capacity
      • Providing high compressive & flexural strength
      • Superior adhesive strength
      • Higher durability
      • Strong bond between the blocks

      Technical Analysis:

      Pull-off strength
      Dry adhesion -> 0.30 mpa

      Compression & flexural strength (after 28 days)
      Compressive strength - cs iv-- >6 mpa
      Flexural strength -> 1.5 mpa

      Water properties
      Water absorption (after 28 days) - ≤ max 0.20 kg/meter2min0.5
      Water retentivity -> 95 %

      How To Apply:

      • Clean any dirt, loose particles or grease from AAC blocks, fly ash or hollow blocks and pre-wet the areas before application.
      • Add Block Jointing Mortar to recommended 23% water and mix well for 5-10 minutes.
      • Apply using a mason’s notch trowel and make an even 3-4mm joint layer on a clean, dry block surface.
      • Correction time for re-alignment is up to 10 minutes to ensure perfection of block placement.
      • The Block Jointing Mortar is self-curing and does not require a water curing process, post-application.
      TDS

      DryChem Is Always Interested In New, Challenging And Exciting Projects

      So, why not contact us and send us your project requirements, and we'll do the rest!

      Submit A Project Request