Product Description
Block Jointing Mortar-LC-51510 consists of cement, graded sand and specialized polymers which combine to give superior strength, water retention and stability.
LC-51510
Features
- Increasing overall masonry strength & load-bearing capacity
- Providing high compressive & flexural strength
- Superior adhesive strength
- Higher durability
- Strong bond between the blocks
Technical Analysis:
Pull-off strength
Dry adhesion -> 0.30 mpa
Compression & flexural strength (after 28 days)
Compressive strength - cs iv-- >6 mpa
Flexural strength -> 1.5 mpa
Water properties
Water absorption (after 28 days) - ≤ max 0.20 kg/meter2min0.5
Water retentivity -> 95 %
How To Apply:
- Clean any dirt, loose particles or grease from AAC blocks, fly ash or hollow blocks and pre-wet the areas before application.
- Add Block Jointing Mortar to recommended 23% water and mix well for 5-10 minutes.
- Apply using a mason’s notch trowel and make an even 3-4mm joint layer on a clean, dry block surface.
- Correction time for re-alignment is up to 10 minutes to ensure perfection of block placement.
- The Block Jointing Mortar is self-curing and does not require a water curing process, post-application.
DryChem Is Always Interested In New, Challenging And Exciting Projects
So, why not contact us and send us your project requirements, and we'll do the rest!
Together We Can.
Connect, follow and have a conversation with us
- CIN: U26900MH2010PTC210117
-
Plot No. A-246,
TTC Industrial Area, M.I.D.C.,
Mahape, Navi Mumbai – 400 701, Maharashtra, India - sales.p2p@drychem.com
- 022-46134613
© 2024 DryChem India Ltd.com All Rights Reserved.