LC-51510 - Drychem

Product Description

Block Jointing Mortar-LC-51510 consists of cement, graded sand and specialized polymers which combine to give superior strength, water retention and stability.

Features

Increasing overall masonry strength & load-bearing capacity
Providing high compressive & flexural strength
Superior adhesive strength
Higher durability
Strong bond between the blocks

Technical Analysis:

Pull-off strength
Dry adhesion -> 0.30 mpa

Compression & flexural strength (after 28 days)
Compressive strength - cs iv-- >6 mpa
Flexural strength -> 1.5 mpa

Water properties
Water absorption (after 28 days) - ≤ max 0.20 kg/meter2min0.5
Water retentivity -> 95 %

How To Apply:

Clean any dirt, loose particles or grease from AAC blocks, fly ash or hollow blocks and pre-wet the areas before application.
Add Block Jointing Mortar to recommended 23% water and mix well for 5-10 minutes.
Apply using a mason’s notch trowel and make an even 3-4mm joint layer on a clean, dry block surface.
Correction time for re-alignment is up to 10 minutes to ensure perfection of block placement.
The Block Jointing Mortar is self-curing and does not require a water curing process, post-application.

TDS

DryChem Is Always Interested In New, Challenging And Exciting Projects

So, why not contact us and send us your project requirements, and we'll do the rest!

Submit A Project Request

Get In Touch

Wall Putty

Texture

Tile Adhesives

Grouts

Other Adhesives

Plastering Solutions

Gypsum Solutions

Repair Mortar

Micro Concrete

Non Shrinkage Grout

Floor Hardner

Coatings

MasterMix

Product Description

Features

Technical Analysis:

How To Apply:

DryChem Is Always Interested In New, Challenging And Exciting Projects